background image

7

Before the first start, carefully familiarize yourself with all the functional settings and features of the control 

panel of the air conditioner and its remote control.
The air conditioner can be controlled separately both from the control panel and from the remote control 

(only for remotely controlled models).

AIR CONDITIONING PANEL

FUNCTION BUTTONS AND INDICATORS

1

 

POWER Button (ON / OFF)

Turns on / off the power of the air conditioner.

2

 

“NIGHT MODE” button (“SLEEP”)

Used to start the air conditioner in the "NIGHT" mode.

3

 

FAN Button (FAN / ION)

 (

ION - optional

)

Used to select the fan speed. Each time you press this button, the fan speed changes in the following 

sequence: LOW - MEDIUM - HIGH - AUTO (LOW - MED - HI - AUTO), after which the cycle repeats again. 

When LOW, MEDIUM, and HIGH fan speeds are selected, the corresponding indicators light up on the 

control panel. When AUTO is selected, they are all highlighted with a dimmer light.

NOTE: Press and hold this button for 3 seconds to start ION functions. In this case, the ion generator is 

activated, which helps to remove pollen and other impurities from the air by absorbing them by the filter. 

Pressing and holding this button again for 3 seconds will stop the ION function.

4

 

The “INCREASE” (+) and “REDUCE” buttons (-) (“UP” (+) and “DOWN” (-))

Used to adjust (increase / decrease) the temperature in increments of 1ºC (2 ° F) in the range of 17-30 ° C 

(62-88 ° F) or to set the timer in the range of 0 to 24 hours.

NOTE: The temperature on the control panel display can be displayed in degrees Celsius or Fahrenheit. To move 

from one degree to another, simultaneously press and hold the INCREASE (+) and REDUCE (-) buttons for 3 

seconds.

5

 

Button “MODE SELECTION” (“MODE”)

Selects the appropriate operating mode. Each time you press this button, the operating mode of the air 

conditioner changes in the following sequence: AUTO (AUTO) - COOLING (COOL) - DRY (DRY) - VENTILATION 

(FAN) - HEAT (HEAT) *, after which the cycle repeats again.

* - only in 

TE-PT-12KHC-BLG

 models with this functionality.

At various operating modes of the air conditioner, the corresponding symbols are highlighted on its control 

panel.

1

2

3

5

6

7

4

8

9

ION - Optional

Optional

Optional

CONTROL PANEL

Summary of Contents for NIKOLACOOL TE-PT-12KHC-BLG



















Reviews: