To enable, touch
Controls
>
Safety
>
Sentry Mode
>
View Live Camera via Mobile App
on the Model S
touchscreen. Once enabled, ensure there are no
occupants in the vehicle and all doors are closed. Then,
on the Tesla mobile app, go to
Safety
>
Sentry Mode
and touch
View Live Camera
to see a live video feed of
your vehicle’s surroundings.
In addition, if Model S is equipped with a pedestrian
warning speaker (see
), you can press and hold the microphone
button on the mobile app to transmit your voice through
this speaker.
When
View Live Camera
is actively being used, Model S
may periodically flash its exterior lights and display a
message on the touchscreen to notify others that the
area surrounding the vehicle is being viewed through the
cameras.
View Live Camera
is limited to approximately one hour
(or 15 minutes for some regions) of cumulative usage
per day.
NOTE:
Video and audio quality can vary depending on
network connectivity.
NOTE:
The live camera feed is fully encrypted and
cannot be accessed by Tesla.
Viewing Video Recordings
You can view recorded footage on the touchscreen
when Model S is in Park. Touch the Dashcam icon
located in the app launcher or the Dashcam icon on the
Controls
screen. Touch the menu icon in the top corner
of the screen. The tabs display a list of all video clips,
organized by location and timestamp. Pause, rewind,
fast forward, and delete video recordings as needed.
You can also navigate to
Controls
>
Safety
>
Delete
Dashcam Clips
to delete all dashcam and Sentry Mode
footage, including recent and saved clips.
NOTE:
Dashcam recording pauses when you launch the
Viewer.
You can also view video footage by removing and
inserting the USB flash drive into a computer and
navigating to the TeslaCam or TeslaTrackMode (if
equipped) folder.
The TeslaCam folder contains three sub-folders:
• Recent Clips: When recording, Dashcam continuously
saves footage to Recent Clips in 60-minute cycles.
Footage is overwritten every hour unless you
manually save it. Four videos are recorded for each
clip, one from each camera (front, rear, left, and
right).
• Saved Clips: Contains all recordings that are saved
using Dashcam.
• Sentry Clips: Contains the last 10 minutes of footage
from all Sentry Mode events that triggered an Alert
or Alarm state. If storage space on the USB flash
drive becomes limited, the oldest Sentry Clips are
deleted to provide space for new ones. Once deleted,
you cannot retrieve them.
When the USB flash drive runs out of storage space,
video footage can no longer be saved. To prevent the
flash drive from getting full, regularly move saved videos
to another device and delete them from the flash drive.
Dashcam and Sentry Mode
153
Using the Touchscreen