background image

Features and specifications

2

Features and specifications

Features

The Home Connector features ground 

fault protection with self-testing and 
auto-reclosure (see below). 

Note: 

Manual resetting or testing is not 

required.

Ground monitoring circuit

The Home Connector features a ground 

monitoring circuit that continuously 
checks for the presence of a safe ground 
connection. 

Auto-reclosure

If a problem occurs that interrupts 
charging, the Home Connector will 
automatically clear the error condition 
and re-attempt charging.

If a problem is immediately sensed a 
second time, the Home Connector will 
wait 13 minutes before re-attempting to 
charge. This process will repeat several 
times. 

After several unsuccessful attempts, no 
further charging attempts will be made 
and the appropriate front panel indicator 
light will be illuminated to indicate the 
nature of the failure (see 

Front panel 

indicator lights, page 11

).

This feature helps to ensure that your 
vehicle will be charged and ready for use 
when needed. Temporary problems such 

as ground faults or utility power surges 
will be overcome automatically, without 
your attention.

Cold load pickup

This feature is activated if the utility power 

fails during charging. 

Providing the charging cable is plugged 
into the vehicle when utility power is 
restored, the Amber 

CHARGING

 light will 

blink and the unit will delay energizing the 
cable for a period between 2 and 12 
minutes. This prevents the utility grid from 
experiencing a large surge at turn-on, 
allowing electric vehicles in the area to 
begin drawing current at random times, 
rather than all at once. 

If desired, you can manually resume 
charging by pressing and holding the 

START

 button on the front panel.

Note: 

If a power outage occurs, the Home 

Connector will automatically try to resume 
charging when power is restored.

Home Connector Users Manual.book  Page 2  Monday, April 26, 2010  12:38 PM

Summary of Contents for HOME CONNECTOR


















Reviews: