TN-18-16-001 R2
Page 14 of 15
Suggest repair to customer:
•
Deburr the area with a hand deburring tool to remove the sharp edges if sharp edges are found.
•
Recommend the replacement of the HV cables if the HV cables are damaged.
•
Recommend HV battery replacement if:
o
A passthrough is damaged.
o
The HV battery enclosure fails leak test due to impact.
o
The HV battery enclosure has low isolation due to impact.
Rear Skid Plate
1. Visually inspect the rear skid plate for tears, dents, or breaches (Figure 24).
Figure 24
– Skid plate location
2. Remove the rear skid plate (Figure 25) (refer to Service Manual procedure 16102202).
Figure 25
–Skid plate
3.
Inspect the HV cables and passthroughs and replace any compromised components.
4.
Remove and assess damage to components such as HV cables, baseplate, fasteners, etc.
