Qg 2 Multi-Sync Gateway User Guide
Command Reference
SJC-DEV7250-HR Rev. 1.14
18
Netmask:
255.255.255.0
Gateway:
0.0.0.0
4.4.1
Network Configure Command
This command lets the user configure Ts2 Management port network parameters.
Figure 12 Network Configure Command
4.4.2
Network Status Command
Get network status for the Management Port, PTP Timing Port-1, and PTP Timing Port-2.
Figure 13 Network Status Command
4.4.3
Network Ping Command
Send a ping message to a device on the network to test reachability. The results of the ping operation
are displayed as “Ping Success” or “Ping Failed”.
The ping command takes an additional parameter “mgmt” or “ptp” to specify from which port the ping
request needs to go out.
