36
Post-maintenance
VACUUM
FRESH
PUSH
Close
Releasing
mechanism
Tumbler
cover
Attach
the seal inside
After performing maintenance, wipe all
parts carefully, dry them sufficiently, and
re-assemble them.
For the tumbler, attach the seal, and
attach the interior surface to the exterior
surface by closing tightly.
Maintenance
Wash each part with a sponge using neutral detergent,
and rinse it well with water or lukewarm water (lower
than 40
℃
).
Water may enter between the exterior surface and the
interior surface of the tumbler when they are not closed
tightly or when the tumbler is soaked in water, etc.
In such cases, disassemble the exterior surface of the
tumbler from the interior surface and allow both to dry
thoroughly.
*Remaining moisture might promote mold.
Please wipe the cover after shaking
it well because water easily pools in
the hole in the center.
Maintenance
Dishwasher/dryer usage
★
Dishwasher/dryer safe items
・
Tumbler (exterior surface/interior surface/inner seal)
Dishwasher/dryers with specifications exceeding 80ºC cannot be used.
Disassemble the exterior surface from the interior surface, remove the seal, and wash in
accordance with your dishwasher/dryer's manual.
Summary of Contents for TMV3000SEA
Page 39: ......
Page 40: ...8065 1 Vacuum Cold Hot All in One Blender TMV3000SEA...
