Tescom Prime Plus 1101 SRT, User Manual

Page: 53 / 69

53
USER MANUAL
PRIME PLUS � 1/1 � 1-3 kVA � ΟNLINE UPS
15
2. Follow the on-screen instructions to install the software.
3. When your computer restarts, the monitoring software will appear as an orange plug icon
located in the system tray, near the clock.
2-5. Battery Replacement (Only for RT Models)
NOTICE: This UPS is equipped with internal batteries and user can replace the batteries
without shutting down the UPS or connected loads.(hot-swappable battery design)
Replacement is a safe procedure, isolated from electrical hazards.
CAUTION!! Consider all warnings, cautions, and notes before replacing batteries.
Note: Upon battery disconnection, equipment is not protected from power outages.
Step 1
Step 2 Step 3
Remove front panel. Disconnect battery wires. Pull out the battery box by
removing two screws on the
front panel.
Step 4 Step 5 Step 6
Remove the top cover of
battery box and replace the
inside batteries. After replacing the
batteries, put the battery
box back to original location
and screw it tightly. Re-connect the battery wires.
Step 7
Put the front panel back to the unit.