EN
6
STYLING
STEP 1:
Your hair should be dry or very
nearly dry when using the styler.
Separate the strands of hair to be
curled and gently brush it free of
tangles.
STEP 2:
Switch on the tong and wait for it to
reach operating temperature.
STEP 3:
Open the clamp by pressing the
clamp release and place the ends
of the strands of hair on the tong.
Hold tightly by releasing the clamp.
STEP 4:
Rotate the handle so that the
strand of hair is rolled up to the
roots. Maintain sufficient distance
between the scalp and curling tong.
WARNING: ONLY HOLD THE END OF
THE TONG USING THE COOL
TIP.
STEP 5:
Hold the tong in this position for
around 15-20 seconds, or hold in
position for 5-10 seconds to create
gentler hair waves.
STEP6:
Carefully unwind the strand half
way, open the clamp by pressing
the clamp release and free the curl
gently from the tong.
STEP 7:
Continue styling the remaining
sections of hair.
NOTE:- The best combination of styling time
and technique will be achieved with some
practice and experimentation. Initially it is
best to practise on a small area of hair to
achieve the effect you want.
AFTER STYLING
Press the ON/OFF button to turn off the
appliance.
Disconnect the appliance from the mains
and move it to a safe place to cool before
cleaning and storage.
CARE AND CLEANING
The appliance must be unplugged before
cleaning.
Let the appliance cool down before
touching or cleaning the body.
Clean the housing with a slightly damp
cloth.
DO NOT use any harsh detergents,
abrasives, solvents or cleaners. NEVER
immerse in water to clean.
Dry thoroughly before use.
