5
PLAYING A CD
Fast search
Press and
•
hold
the
}
or
{
button to fast search forward
or backward through a track.
The track will search until the button is released.
Repeat
Press the
•
REPEAT/PRESET
button repeatedly to step
through the repeat modes.
Repeat one (
•
REP
flashes on display) to repeat the
current track continually.
Repeat all (
•
REP
is displayed, not flashing) to repeat
the disc continually.
Repeat off, to switch off repeat.
•
Random/Shuffle
Press the
•
RANDOM
button to set Random mode.
‘
RAND
’ will be displayed and the tracks will play in a random
sequence.
Selecting CD mode
Press the
•
MODE
button repeatedly until ‘CD’ is displayed.
Loading a CD
Press
•
OPEN/CLOSE
on the CD lid to open the lid.
When first used there may be transit protection installed
•
in the CD loading tray. Remove this before use.
Holding the disc by the edges, place the disc on the
•
turntable in the centre of the CD loading tray with the
label uppermost. Press the centre of the disc into place on
the turntable with a click.
Close the CD lid and press it down to latch it.
•
The unit will read the disc and display the number of tracks on
the disc before starting to play automatically.
Removing a CD
Press
•
OPEN/CLOSE
on the CD lid to open the lid.
Holding the disc by the edges, lift the disc off the loading
•
tray and place it back in the case.
Close the CD lid.
•
Play/Pause
Press the
•
/
/
,
button repeatedly to switch from play to
pause mode while playing.
The elapsed time of the track playing will be shown.
Stopping play
Press the
•
.
button while the disc is playing.
The CD will stop and the number of tracks on the disc will be
displayed.
Selecting tracks
Press the
•
}
or
{
button to select the next or previous
track.
Programming tracks
You can load a CD and store a programmed selection of up to
20 tracks to play in your preferred sequence.
To set a program
Load a CD and wait for it to read.
•
Press
•
the
.
button to stop play.
Press the
•
PROGRAM/MEMORY
button.
‘PROG’ will flash above ‘1’ (first program entry) and the
flashing legend ‘--’ (the track number of this entry).
Select the track number you want to program by pressing
•
the
}
or
{
button.
To save the displayed track number into the program
•
sequence, press the
PROGRAM/MEMORY
button.
‘2’ will now flash, waiting for you to enter the second track
in the program.
Repeat the last two steps until you have stored all the
•
tracks in the program sequence.
Playing the program
Press the
•
/
/
,
button to start the program playing.
The program will begin to play.
Selecting tracks
You can navigate through the tracks stored in the program
•
by pressing the
}
or
{
button.
Clearing a program
The program is cleared by stopping play, then pressing the
•
.
button.
Repeat or random play of a program
Repeat or random modes can be set as normal when a program
is playing.
PROGRAM PLAY
