HBS19
EN
7
Fitting the blender, whisk or potato masher
attachments
•
Make sure the motor body is unplugged.
•
Hold the motor body in one hand and the attachment
in the other.
TURBO
•
Align the index mark
on the motor body with
unlocked ( ) on the
attachment.
•
Make sure the attachment is firmly locked to the motor
body before use.
To detach the attachment
•
Unplug the appliance.
•
Hold the motor in one hand and the attachment in the
other.
•
Rotate the attachment to align the index mark with
unlocked ( ).
•
Lift off the motor body
TURBO
•
Push the attachment
against the motor
body and rotate the
attachment to align the
index mark with locked
( ) on the attachment.
Operation
Power and speed control
The appliance features variable speed control.
Use the slow speed where possible especially when
you commence blending, whisking etc or if you are
smoothing out lumps or reducing food to a puree.
The high speed can be used as a finishing touch or when
a particularly fine mix is needed.
TURBO
•
Set the speed you want with the
speed control before switching the
appliance on.
The small dots indicate slower
speeds, the larger dots indicate
higher speeds.
TURBO
•
Press and hold the On/Off button
to switch the appliance on.
•
Release the On/Off button to
switch the appliance off.
NOTE: Never run the appliance continuously for more than
the time specified for the accessory you are using.
Turbo button
TURBO
•
Hold the turbo button for a
momentary boost of speed.
NOTE: The turbo button should only be used for a few
seconds. Never hold the turbo button for more than this
time or the appliance may overheat.