background image

Original Instructions

Tesco CDGT0216

2

3. Electrical Safety

It is strongly recommended that mains power 

• 

be  supplied  to  the  Grass  Trimmer  through  a 

residual  current  device  (RCD)  having  a  rated 

residual current rating not exceeding 30mA.
Where  necessary,  use  a  suitable  waterproof 

• 

extension lead, rated for outdoor use and no 

longer than 25 metres.
Plugs and connectors must be protected from 

• 

getting wet.
Turn off and remove the plug from the socket 

• 

when  leaving  the  Grass  Trimmer  or  when 

attempting to clear any debris or blockage.
Should  the  power  cord  become  damaged  in 

• 

any  way,  turn  off  the  mains  power  supply  at 

the socket and immediately unplug the cord. 

When the cable is totally disconnected it can 

be removed by qualified personnel.
Do  not  use  when  it  is  raining  or  in  wet 

• 

conditions. Avoid all contact with water.
Power tool plugs must match the outlet.

• 

Never modify the plug in any way.

• 

Avoid body contact with earthed or grounded 

• 

surfaces  such  as  pipes,  radiators,  ranges 

and  refrigerators.  There  is  an  increased  risk 

of  electric  shock  if  your  body  is  earthed  or 

grounded.
Never use the power cable for carrying, pulling 

• 

or unplugging the Grass Trimmer.
Keep  the  power  cable  away  from  heat,  oil, 

• 

sharp  edges  or  moving  parts.  Damaged  or 

entangled  power  cables  increase  the  risk  of 

electric shock.
When operating the Grass Trimmer outdoors, 

• 

use an outdoor extension power cable suitable 

for outdoor use.
Take care to keep the mains cable away from 

• 

the cutting line. Always be aware of the position 

of the cable.

4. Personal Safety

Never  operate  the  Grass  Trimmer  when  you 

• 

are tired, ill or under the influence of alcohol, 

drugs or medicine.
Use  safety  equipment.  Always  wear  eye  and 

• 

ear  protection.  Safety  equipment  such  as  a 

dust mask and non-skid safety shoes used for 

appropriate  conditions  will  reduce  personal 

injuries.
Remove any adjusting wrench before using the 

• 

Grass Trimmer. A wrench that is left attached to 

a rotating part of the Grass Trimmer may result 

in personal injury.
While operating the Grass Trimmer always wear 

• 

substantial footwear and long trousers. Do not 

operate  the  Grass Trimmer  when  barefoot  or 

wearing open sandals. Avoid wearing clothing 

that is loose fitting or that has hanging cords 

or ties.
Be  aware  of  harmful/toxic  dusts  arising 

• 

from  grass  trimming  etc,  (e.g.  fertilizers, 

insecticides).
During assembly take great care when fitting 

• 

the guard as this has a very sharp cutting edge 

on one side for cutting the nylon line.

5. Use and Care

Do not use the Grass Trimmer if the switch lever 

• 

does not turn it on and off.
Use  the  Grass  Trimmer  and  accessories  in 

• 

accordance  with  these  instructions  and  in  the 

manner intended, taking into account the working 

conditions and the work to be performed. Use of 

the  Grass Trimmer  for  operations  different  from 

intended could result in a hazardous situation.

6. Service

Have your Grass Trimmer serviced by a qualified 

• 

repair technician using only identical replacement 

parts. This will ensure that the safety of the Grass 

Trimmer is maintained.

Summary of Contents for CDGT0216

















Reviews: