Safety Instructions:-
・
Stay alert and use common sense - Do not operate the impact wrench when you are tired
or under the influence of alcohol, drugs or medication.
・
Always wear eye protectors when using the impact wrench - Eye protectors must
provide protection from flying particles from the front and the side.
・
Always wear ear protectors when using the impact wrench.
・
Do not overreach - Keep proper footing and balance at all times.
・
Never use any type of bottled gas as a source of power for the impact wrench.
・
Do not connect the air supply hose with your finger on the trigger of the
impact wrench.
・
Do not exceed the maximum pressure for the impact wrench: 90 psi / 6 bar.
・
Check hoses for leaks or worn condition before use, and ensure that all
connections are secure.
・
Do not carry out any alterations or modifications to the impact wrench.
Work Environment:-
・
Keep the work area clean and tidy.
・
Dress appropriately - Do not wear loose clothing or jewellery. Tie long hair out of the way.
・
Keep children and visitors away - Do not let children handle the impact wrench.
・
Make sure that any other persons in the work area are dressed suitably and are wearing
eye and ear Protectors.
・
Do not operate the impact wrench where there are flammable liquids or gases.
・
Keep the air supply hose away from heat, oil and sharp edges.
・
Do not fit the impact wrench to any stand or clamping device that may damage the tool.
Disconnecting The Air Supply:-
Do not disconnect the air supply hose until the compressor has been shut down and the
compressed air released.
1.Once the pressure has been released, disconnect the air supply hose from the impact
wrench.
2.Store the Impact Wrench safely in its box in a dry , secure environment.
Air Impact Wrench ½” - PIW 13
Operation & Maintenance Guide
FF - MM - 167 REV - 0
Sheet 3 of 4
