Page 9 of 20
7.2 Remote Brightness:
Use the up and down keys (/\ and \/) to set the remote brightness, and
ENTER
to
accept the new level.
MENU
exits without changing the screen brightness and the
previous set level will restore.
The Remote Brightness also sets the intensity of the AVS indicator LED’s when
connected to a 303 GeoTrip®.
7.3 Contrast:
Use the up and down keys (/\ and \/) to set the screen contrast. Higher the contrast
value, the darker the screen and text are and it can make the screen easier to view
from above. Lower the contrast value, the lighter the screen and it can make the
screen easier to read from below.
Adjust the contrast to make the display as sharp and clear as possible depending on
the angle that the unit is mounted.
ENTER
will set the contrast,
MENU
exits without changing the contrast.
8.0 Settings menu:
The settings menu contains options to set the display units, characters and various
options for timing.
8.1 Set Units:
Changes the current units (km or mi) set in the trip meter. Current selection has a solid
dot next to the units. Press
ENTER
to change the selection,
MENU
exits the settings
menu. This setting does not just change the displayed text, but makes the GPS probe
calculate distance and speed as required in kilometres, or miles.
8.2 Digit Font:
Changes the display font used on the main screens. Current selection has a solid dot
next to it. Normal is a rounded bold font (default setting) and digital shows a 7
segment type display. Press
ENTER
to change the selection,
MENU
exits the settings
menu.
8.3 FRZ clears INT:
This option selects what happens when FRZ is pressed. The default setting when FRZ
is pressed, the interval distance counter clears, and starts counting in the background
from zero whilst the displays are frozen. When FRZ is pressed again, the distance
counters resume, showing distance in real time (Split Freeze).