Page 6 of 20
4.4 Electronic Probe (DSI) - T014:
Connect as per the instructions that come with the DSI. Also see figure 5 for wiring
diagram for connections to the GeoTrip®.
Note
the connections to the GeoTrip® are
not the same as the 202PLUS/ 303PLUS.
4.5 Remote zeroing unit – T008 & T011G:
When installing, follow figure 5.
Fit terminal pins to RZU cable and follow wiring diagram for terminal connections.
5.0 Menu Layout on GeoTrip®:
*Only available with GeoTrip® GPS module fitted.
**Only available on the 303 GeoTrip®.
6.0 Calibration:
The GeoTrip® offers two calibration methods, automatic and manual calibration with
the option to calibrate from GPS.
Before calibration select either CAL1 or CAL2 from the Calibration menu, and the
correct units (km or miles) are selected from the settings menu. This is most important
if you are calibrating from GPS, as the unit needs to know the correct distance
travelled in km or miles.
CALIBRATION
SELECT CAL
AUTO CAL
MANUAL CAL
GPS CAL*
DISPLAY
SCREEN BRIGHTNESS
REMOTE BRIGHTNESS
CONTRAST
MENU
SETTINGS
SET UNITS
DIGIT FONT
FRZ CLEAR INT
SET AVS TIMES**
GPS OPTIONS*
START THRESHOLD
STANDBY PROBE
TIME / DATE**
TIME
DATE
TIME ZONE
SET FROM GPS (UTC)*
TIME FORMAT
PERFORMANCE**
MAXIMUM SPEED
0-60 TIMES
0-100 TIMES
0-xxx (CUSTOM) TIMES