Page 4 of 20
1.5 Gear Box Probe, Probe No. T007:
Fits M22 Gearbox speedometer cable drive. Japanese and some American car makers
gearbox.
1.6 Electronic speedometer probe (DSI), Part No. T014:
Compatible with all cars that have an electronic speed signal (Not CANBUS).
2.0 Optional Extras:
2.1 Remote display. Part No. T016G:
Remote graphical LCD display with LED backlight. This displays Speed, Average
Speed & Distance. There are 7 LEDs that are used on regularity rallies. These indicate
to the driver how far ahead or behind of the required target speed in seconds. This
item can be connected to the tripmeter after purchase.
2.2 Remote Zeroing unit. Part No. T008 (foot RZU), T011G (Hand
operated):
Remote zeroing unit comes in two models, foot remote for zeroing the Interval
distance. Or a hand operated remote to change the displayed screen or clear both
distance readouts. When fitting, follow figure 5
2.3 Bracket. Part No. T009G:
The bracket can be bolted to the cars dashboard or use the supplied suction cups for
window fixing. The included sun visor can be removed.
3.0 Fitting GeoTrip® to vehicle.
3.1 Mounting GeoTrip®:
Secure GeoTrip® to the car using optional accessory T009G bracket, use the screw
mount brackets or suction cups to the vehicles windscreen.
3.2 Power lead:
Connect the power lead to the vehicles 12 volt power using the supplied 2 Ampere
fuse. When connecting RZU (remote zeroing unit) or probes you will need to connect
the cables to the back of the GeoTrip® using the 12 way connector, follow the wiring
diagrams at the back of this manual.