2.3.2 ENV TRIGGER MODE
n
n
N1
Each trigger signal after the trigger source triggers the envelope.
N2,N3,N4,N5
The envelope is triggered only after every other (N2), every third (N3), every fourth
(N4) or fifth (N5) trigger signal. All trigger signals in between are ignored.
Example: Trigger Source: Single, ENV MODE: N3
n
RPT
During an active trigger signal, the envelope will be triggered again every time the
envelope voltage drops to the sustain level (end of the decay phase). This occurs with
increasing frequency the lower the delay, attack and decay times are. The release
phase does not begin until the end of the trigger. Very short delay, attack and decay
times result in a very high repeat frequency, resulting in an effect similar to a ring
modulator.
Example: Delay, Attack at minimum, Sustain 50%
14
SINE WARP 9 (English)
