Installing the Cameo 200 RT – PCI card
Before installing the Cameo 200 RT into your computer, please pay attention to special
features of your computer's configuration. Read the instruction manuals of your computer and
other additional cards for information about settings.
If you follow the instructions, the installation should be easy.
If you are experiencing any problems, please carefully read the corresponding sections in the
manual once again.
First, check if the package is complete.
Minimum contents of package:
1 Cameo DV, PCI-IEEE1394 Controller
1 Cameo Connect, 5¼” Front module (additional 4 spare front screen in 4 colors )
1 Installation CDs
1 IEEE1394 connection cable 6 Pin to 4Pin for connection to your camcorder
1 IEEE1394 connection cable 6 Pin to 6Pin for connecting the Cameo 200 RT to the Cameo
Connect
1 Registration card with serial number
1 Instruction manual
VideoSystem Cameo 200 RT (English)
7
Send in your registration card as soon as possible or get registered via the internet on
http://www.terratec.net/register.htm
.. This is important for support and
hotline.
