19
BLOOD PRESSURE MONITOR – INSTRUCTION MANUAL
EN
3. Press “START/STOP” button to power off, otherwise it will turn off within 1 minute.
Tips: Maximum 60 records per user.
DATA MANAGEMENT
Recall the Records
1. When the monitor is off, please press “MEM” button,it will display the latest record first when the
records are less than three groups. When there are more than three groups, it will display the average
value of the latest three records first.
2. Press “MEM” button or “SET” button to get the record you want.
The date and time of the record will be shown alternately.
3. If you want to look over another user’s data, switch the User button to select the desired user. Then
you can look over its historical records.
Delete the Records
If you did not get the correct measurement, you can delete all results for the selected user by
following steps below.
1. Hold pressing “MEM” button for 3 seconds when the monitor is in the memory recall mode ,the flash
display “dEL ALL” will show.
2. Press “SET” button to confirm deleting and the monitor will turn off.
3. If you don’t want to delete the records, press “START/STOP” button to escape.
The current No. is No 1
The corresponding date is January 2nd
The corresponding time is P.M. 10:08
