TGR
System
3
Tel: 705-435-7373 | www.terragensolar.ca | [email protected] | 120 Parsons Rd, Alliston, ON L9R 1E9
3. Tools Required
5/16 socket (for Tek screw), 13mm
deep socket (for 8mm nut)
+
13mm Open-Ended / Combo Wrench
5mm Metric Allen Key OR 5mm Allen
Key Socket
or
Socket wrench with matching drive
for each of the above
(i.e. 3/8 or 1/2" drive)
OR Cordless drill and socket adapter
for each of the above
or
+
Chalk line and measuring tape
+
7 ft-lb and 12 ft-lb
pre-set slip type torque wrenches OR
an adjustable torque wrench
or
Miscellaneous
•
Onsite cutting ability
•
Cold galvanizing spray
-
Use of impact tools when installing clamps and hardware will cause galling (seizing of SS hardware). TerraGen
will not free issue components damaged from use of impact tools.
-
All fasteners must be torque marked after applying the required torque.
