HDMI encoder with IP output mhi430
1. Product description
HDMI encoder with IP output (in text - module) designed to encode in H.264 standard and broadcast in multicast on an
IP network the services (TV programs) issued from HDMI input. The IP streams can be viewed using an IPTV set-top box
or a software video player.
Modules are intended for indoor use only.
2. Characteristics
Input
: Three HDMI inputs.
Output
: Three IP-encapsulated services (TV programs), encoded in H.264 standard, with individual multicast addresses.
• Generating of DVB tables.
• UDP & RTP transmission protocols.
• Web interface for configuration and setting.
• SNMP agent for monitoring and alarms.
• SAP & SDP protocols that facilitate automatic service selection on the user's STB and provide information to external
servers.
• PID configuration.
• PSI/SI configuration.
• PAT, PMT and SDT table generation.
• Configurable QoS marking.
• Configurable Time To Live.
3. Safety instructions
Installation of the module must be done according IEC60728-11 and national safety standards.
Any repairs must be made by qualified personnel.
Do not expose this module to moisture or splashing water and make sure no objects filled with liquids, such as vases,
are placed near or on the unit.
Avoid placing the module next to heat sources such as central heating components or in areas of high humidity.
Keep the module away from naked flames.
If the module has been kept in cold conditions for a long time, bringing it into a warm environment may cause condensation,
so allow it to warm up for no less than 2 hours before plugging into the mains.
Ventilation should not be impeded by covering the module, such as newspapers, table-cloths, curtains etc.
Mount the module in a vertical position only. If installing in a 19” rack system additional forced air cooling fans may be
required (see table "
Technical specifications
" - operating temperature range).
Always allow 10 cm of free space from the top, front and bottom of the unit to enable any heat to be dissipated.
Draugystes str. 22, LT-51256 Kaunas, Lithuania, tel.: +370 37 - 31 34 44, fax: +370 37 - 31 35 55
E-mail:
,
http://www.terraelectronics.com
Channel processing equipment
This product complies with the relevant clauses of the European Directive 2002/96/EC. The unit must be recycled
or discarded according to applicable local and national regulations.
Equipment intended for indoor usage only.
TERRA confirms, that this product is in accordance to following norms of EU: EMC norm EN50083-2, safety norm EN60065,
RoHS norm EN50581.
TERRA confirms, that this product is in accordance with Custom Union Technical Regulations: “Electromagnetic compatibility of technical
equipment“ CU TR 020/2011, “On safety of low-voltage equipment“ CU TR 004/2011.
Vers. 1.02
