3
10
Mounting on DIN rail
Figure 5. Mounting or removing to/from
DIN rail of plastic spacers (supplied).
Figure 3. Mounting to DIN rail
Figure 4. Mounting from DIN rail
Figure 16. User management
Enter it’s username, password, select a role and press „Add“ button.
Only administrator (user with a role „admin“) may manage other users.
NOTE
: By giving your personal password or user access account for another person, you take full responsibility for all
module settings modifications made by that person or anyone else they may give the password to.
7.6.6. Restore defaults
All parameters will be restored back to factory defaults after confirmation. The exception – IP address and users – these
parameters will be unchanged. To restore IP address and system password to system defaults, see „RESET“ button at
section 3, pos.7.
Several seconds can take to restore all parameters, so be patient.
7.6.7. Restart the device
Device will be restarted after confirmation to do it. This is an alternative to pressing a „RESET“ button when the device
is operating.
7.6.8. Date, Time
System time can be configured manually or taken from NTP server (only if module can access NTP server).
Figure 17. "Date, Time" settings table
7.6.9. Language
Device control panel supports several preinstalled languages. A change of language requires system restart. Note, that
all previously logged records will remain in previous language.
Additional languages can be installed under request. Contact our distributors for such possibility.
1.
2.
RESET
ETHERNET
mhi430
DC IN
12V
-
+
TS/IP
OUT
RESET
ETHERNET
mhi430
DC IN
12V
-
+
TS/IP
OUT
RESET
ETHERNET
mhi430
DC IN
12V
-
+
TS/IP
OUT
