17
⚫
Turn on the power & thermostat control switch to choose the setting: I = 750W,
II = 1250W, III = 2000W.
⚫
This appliance will keep working after the switch i
s rotated to the setting “I”, “II”,
or “III”.
⚫
If you rotate the power & thermostat control switch over the setting “III”, the
thermostat will be switched on. The appliance will automatically maintain the
set temperature.
⚫
To turn off the unit, rotate the po
wer & thermostat control switch back to “0”.
⚫
After use, unplug it from socket.
⚫
The unit also incorporates an internal fan, which can be switched on
independently of the heating elements. This is operated by means of the fan
switch along front side it. The fan will only operate with the thermostat in the
“ON” position and can be used when the heating elements are “ON” to blow
warm air into the room. In warm conditions the fan can be used with the
heating elements “OFF” to blow cool air into the room.
Caution: The heater will remain hot for some time after it is turne
d off. Handle with
care.
SPECIFICATIONS
Power supply : 220V-240V~50Hz
Power settings : 800-1200-2000W
OVERHEAT PROTECTION
This heater is protected with an overheat protection that switches off the appliance
automatically in case of overheat, e.g. due to the total or partial obstruction of the
grids. In this case, unplug the appliance, wait about 30 minutes for it to cool and
remove the object which is obstructing the grids. Then switch it back on as
described above. The appliance should operate normally. Should the problem
persist, please contact the nearest customer service.
TIP OVER PROTECTION
This heater is protected with a safety switch that turns off the appliance
automatically when the heater falls over, or is at an excessive angle from the
