Display symbol description:
：
FAN
：
Low heat
1000W
：
High heat
2000W
：
Timer
：
Week timer
：
Light on:
set temperature mode,
temperature range 18-45
℃
Light flickering:
Open window detection start up.
Remote control:
Power
Press
“
” as follows: ON(Fan working), OFF(Fan keep working for 30 seconds when
shutdown the appliance after heating).
Heating
Press
“
”
as follows: Low heat, High heat, FAN working.
Timer
Press
“
” to set timer as follows: 1H,2H,3H.....8H. When week timer is start up, you can not
set this timer function.
Set
temperatur
e
Set
temperat
ure
mode
Light On
1
、
P
ress “
”, set temperature mode is stand by, Press “+” “-” to adjust
temperature, Temperature range: 18-45
℃
.
Press
“-”,
Set temperature is equal to or lower than Environment temperature, stop heating.
Press
“+”,
Set temperature is 1-2
℃
higher than Environment temperature, Low heating.
Set temperature is higher or equal to Environment temp3
℃
, High heating.
2
、
Press OK, or after LED flickering 5s, set temperature mode is start up.
Open
Open
window
detection
Light
flickering
1
、
Open window detection only can be start up when appliance in heating mode(can
not start up when appliance is only fan working) or in set temperature mode.
2
、
Press
“
”,
Open window detection on, Open window detection off.
3
、
Temperature detection start up after 1 minute from Open window detection start
up.
Per 10 minutes(temperature slow down detection check point) as a round, in one
round, detect the temperature once every 5 minutes(temperature fast down
