Termozeta 302008, Instruction Manual, Page: 17 / 20

ENGLISH
17
It is particularly suitable for the delicate cleaning of furniture,
baseboards and base and other such strips
- Crevice tool (9) :
Allows to vacuum in tight spaces (corners, crevices, radiators, etc..).
Accessories (7), (8) and (9) can be directly connected to the handle of the
hose (1) or to the telescopic tube (5).
3 – PUTTING INTO OPERATION
• Make sure that the dust collecting container (21) is housed and properly
mounted in the seat (11).
• Always make sure that the filters (19), (23), (24) and (26) are installed
before using the
appliance (refer to “Cleaning and Maintenance”
paragraph).
• Pull the power cord (18) from its seat and until to pull it out for its entire
length. On the cable, a yellow notch indicates the ideal length of use. A red
mark, instead, indicates the maximum limit of extension. Do not exceed
this
limit.
• Insert the plug into the power outlet and press the ON button (12) to start
the appliance.
• Turning the power control button (14) it is possible to adjust the
vacuuming power (Fig. 2).
• While in use, to change the vacuuming level, slide forward or backward
the cursor (3) on the handle (2) of the hose.
• Using the holder (17) it is also possible to attach the brush (7) to the back
of the appliance, during the stops (Fig. 3).
4 – AFTER USE
• After use, press the button (14) to turn off the appliance, then disconnect
the plug from the power outlet.
• Press the button (15) to rewind the power cord: when doing this it is
recommended to accompany the power cord while it is being rewound.
• If necessary, remove the tools and release the hose (1) from the coupling
hole (13).
• To remove the hose (1) press the buttons on the tube coupling (4) and
rotate it counter-clockwise, then remove coupling (4).