background image

13

www.termoakim.com

Press Menu key, scroll to timer position with arrow marks, press 

enter, program 1 will appear, press enter again, timer page will open, 

enter the time when the device will start on.

On: 00-00

You’ll see a line under the first numbers. This line will show you 

where you are on the menu. Press enter at the setting place where 

the line 00-00 is located, the position will be activated. Set the time 

with arrow marks when you press enter, it is taken into memory. 

Scroll with the down arrow mark set the minute in the second digits 

press enter scroll with the arrow mark.

Off: 00-00

Scroll to the first digits of its location, press enter, enter the time of 

closure, press enter, store the time. Scroll with the arrow sign, press 

enter in minute numbers, set the minute, press enter, you will move 

to the degree position, press enter, Adjust the degree, the degree will 

be stored when you press enter. You’ve become weekly days. If you 

want it to work on all days, press enter to position the square full, if 

you do not want it to work with the arrow key past the empty square 

to leave the device will not work on the day with the empty square. 

Exit with the Esc key. The timer setting is now in memory. To run in 

the timer position, press the timer key in the panel and the device 

switches to my timer position. In the upper-left corner of the screen, 

the mode section exits the clock shape and writes the timer in the 

information corner at stop time. The timer in the information section 

is deleted when the run time is reached. Next to the clock shape is 

the number in which program you are in. You need to press the timer 

button on the panel to deactivate and restart the timer. The program 

is set to 2-3-45 by doing the same.

Note: you must value it between 00:00 and 23.59 hours because it is 

a weekly program.  If the timer program passes to the next day, you 

must enter two or more programs into the system.

Language Selection Of The Device

Press menu, scroll to language selection with the arrow key, press 

enter, select the desired language, and press enter. It  is taken into 

the memory. Exit with the Esc key.

*English *Turkish *Greek

Summary of Contents for GALAXI SMART Series




















Reviews: