Termo AIRSCOUT SPECTRUM User Manual Download

Page: 49 / 52

AIRSCOUT SPECTRUM

Tempo Communications Inc.

1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155

2.14.3 Color

The COLOR menu allows setting a custom color scheme for the graph.
Tap the button GROUND, GRID, or LINE to set the color for the background, the grid, or the spectrum curve

(NORMAL and AVERAGE traces), respectively. The color is defined by moving the sliders for

red

(R),

green

(G), and

blue

(B) channels. To restore the default color scheme, tap DEFAULT. To exit the COLOR menu and return to the SETTINGS
menu, tap BACK.

2.14.4 Signal ID

SIGNAL ID is available for all Airscout Spectrum models on which is possible to set-up 1 MHz

RBW. These Airscout Spectrum models are: 2-8 GHz, 24-40 GHz

Tapping the SIGNAL ID button turns on and off a filter algorithm that reduces the power levels of the

harmonic signals. These artificial signals may become visible on screen if the input power is high and the span is
comparatively large.

Enabling the SIGNAL ID slows down the sweeping. To observe the operation of SIGNAL ID, enable and dis-

able it repeatedly and compare the displayed power levels.

When SIGNAL ID is enabled, the SIGNAL ID button is green in the SETTINGS menu and an indication “ID” is

shown under the graph slightly to the right of the center. SIGNAL ID is disabled by default.

Entering the COLOR menu

The COLOR menu

Summary of Contents for AIRSCOUT SPECTRUM





















































Search results

Summary of Contents for AIRSCOUT SPECTRUM

Reviews:

Related manuals for AIRSCOUT SPECTRUM

Brands by name

Popular brands

Termo AIRSCOUT SPECTRUM, User Manual

Search results

Summary of Contents for AIRSCOUT SPECTRUM

Reviews:

Related manuals for AIRSCOUT SPECTRUM

Brands by name

Popular brands