manualshive.com logo in svg

Termo AIRSCOUT SPECTRUM, User Manual

Share
Download
Termo AIRSCOUT SPECTRUM User Manual Download Page 25

AIRSCOUT SPECTRUM

25

Tempo Communications Inc.

1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155

The available trace types are:

• NORMA

L

Normal trace mode (the default trace mode). The power level values after the detector are displayed on the screen in 
real-time without additional processing.

• MAXHOLD

Shows in blue the highest power levels registered since the sweeping with this trace mode commenced, additional to 
the NORMAL (actual real-time) trace. The number in blue under the graph shows how many sweeps the MAXHOLD 
trace has been plotted. The input power value on center frequency is displayed for the blue MAXHOLD trace. If MARKER is 
activated with MAXHOLD trace mode, the input power value is shown with larger digits for the NORMAL trace and with 
smaller digits for the blue MAXHOLD trace. If POWER IN BAND is activated with MAXHOLD trace mode, the input 
power value is shown with larger digits for the NORMAL trace and with smaller digits for the blue MAXHOLD trace.

When a spectrum curve is saved with MAXHOLD trace mode, only the MAXHOLD trace is preserved.

 

 

 

 

 

Use MAXHOLD trace mode for antenna adjustments. It can also be used to detect intermittent 

WMKREPW SV XS QIEWYVI XLI QE\MQYQ TS[IV SJ ƽYGXYEXMRK WMKREPW

DETECTOR: MAX

DETECTOR: MIN

Summary of Contents for AIRSCOUT SPECTRUM





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands