background image

- 9 -

1. Operating panel

2. Control lamp

3. Air outlet grid

4. Air hose connection piece

5. Air hose

6. Upper condensation water outlet with rubber 

plug

7. Carrier handles 

NAME OF THE COMPONENTS

8. Air inlet

9. Top Filter

10. Air inlet

12. Bottom condensation 

water outlet with rubber plug

with the local network voltage.

DO NOT BLOCK THE VENTILATION. Make sure that the air outlet and air inlet are never 

blocked.

Only operate the Unit on a horizontal surface to ensure no water leakes out.

The Unit must not be operated in an area with explosive and caustic substances.

Please wait at least 5 minutes after switching off the Unit before switching it back on, to 

ensure the compressor is not damaged.

The compressor has a power demand of at least 7 amps. Do not use any extension cable 

with this Unit.

use is excluded.

Technical Service for safety reasons.

CAUTION!

 This  Unit  can  only  be  used  by  persons  (including  children)  with  reduced 

know-how, if such persons are supervised by a person responsible for their safety or who 

has been trained in the use of the Unit. Children should be supervised to ensure they do 

not play with the Unit.   

IMPORTANT INSTRUCTIONS

1.

2.

3.
4.

5.

6.

7.

8.

9.

10.

1

2

3

4

5

6

7

8
9

10

11
12

OUTLINE OF MOBILE AIR CONDITIONER TMCZ 105 F

Summary of Contents for TMCZ 105 F

























Reviews: