- 16 -
HEATING EFFECT
HEATING EFFECT
In the wintertime, on cold days, it is recommended to start the Unit early in order to avoid
intensive cooling of the room.
For the heating function, to improve the heating effect and avoid lower temperatures
(lower than 17°C), we recommend you to remove the rubber cap from the upper water
condensation outlet, thus allowing the condensation water to leak out of the Unit through
the drainage hose.
However, as in “Heating effect” function it is not necessary to connect the drain hose,
please check that in such a case the upper water condensation outlet is closed by the
and display shows the Error Code E4), empty the condensation water tank at the bottom
of the Unit, by removing the rubber cap.
The Heating effect function of the Unit must not be operated at a room temperature of
more than 23°C or less than 7°C.
The Unit can be operated with Heating function if the outside temperature is lower than 7°C.
However, you must then ensure that the Unit is operated inside and that room temperature
is at least 7°C.
•
•
Caution!
In “Heating” mode (“Heating effect”), it is not possible to select fan speed, as the
fan automatically operates at “HI” speed, in order to avoid overheating of the Unit.
•
HEATING EFFECT IN INDOOR OPERATION
The Unit stands in the room to be heated.
Connect the air hose and the air outlet grid to the Unit as displayed in the illustration; the air
hose connection piece and air outlet grid need to be exchanged according to the position of the
Unit (indoor operation or outdoor operation).
For heating in indoor operation, the position of air hose and air outlet grid is shown in the
following Figures:
The cold extract air has to be discharged out of the room through the air hose. This can be
executed e.g. by a tilted window, a door or wall aperture. Make sure that no cold outside air can
enter the room. For heating the room in optimal way, we recommend our selection of various
accessories which reduce or prevent entry of cold air into the room.
