User Manual — Electric heating elements of the SKT series
55
Clock programming
Press both arrow buttons at the same
time
Hour field will start flashing
Set the required hour using
and
Confirm it by pressing .
Minute field is flashing
Set the required minutes using
and
confirm it by pressing .
Set time is displayed.
Clock programming is finished.
In case of a power cut, the device memorises last displayed time. If
the hour shown on the display flashes, it may mean that the time
shown is incorrect. Confirm the time by pressing any button or re
-
set the time.
24-Hour timer
24-hour Timer enables specification of 4 different time zones (T1,
T2, T3 and T4), which allow different temperature settings and, in
-
cluding periods when the device is switched off.
The start of every time zone is programmed subsequently from T1,
T2, T3 to T4 (hour and minutes), and the temperature for every time
zone is specified. The entire cycle is repeated every day on condi
-
tion that the device is on and Timer is active.
Turning the device off does not delete the Timer settings. After turn
-
ing the device back on with the button the Timer will be activat
-
ed with the clock settings from before the device was turned off.
In order to deactivate the Timer press the button for a while, use
the arrows to set the Timer to OF and press again (the device will
switch to the Manual Mode).
Summary of Contents for SKT 1
Page 7: ...Mode d emploi Kit r sistance lectrique 7 Zone 1 Zone 2...
Page 39: ...User Manual Electric heating elements of the SKT series 39 Zone 1 Zone 2...
Page 64: ...64 180 92 Radiateur lectrique Electric only Radiator A 1 2 3 Installation...
Page 65: ...65 4 7 5 8 6 9 5 5 0 5 h MAX 230 V 50 Hz 5 1 2 1 2 MAX 60 5 0 1 5 mm...
