37
User Manual - KTX 4 Blue electric heating element
acteristics of the heating agent cause that the bottom pipes (espe
-
cially the two at the very bottom of the radiator) may have a lower
temperature than the remaining parts of the radiator – this is a nor
-
mal phenomenon.
KTX 4 Blue controller installed on the SPLIT heating elementmake
up a set that can be operated directly (see
Manual operation sec
-
tion
) or via mobile device - smartphone, tablet (see
Remote opera
-
tion section
).
MANUAL OPERATION (direct manual controller operation)
No need to have a
mobile device with a
controlling app installed.
Heating mode
It is possible to set 5 temperature levels in the local mode. Settings
are modified with and buttons. Possible working levels are as
follows: 0 (does not heat) and from 1 to 5, indicating a temperature
range from 30 to 60 degrees Celsius. The icon indicates that the
device is heating.
Dryer mode (Timer)
button is used to turn the mode on and set the time after which
the device is to be turned off automatically. In order to activate the
Dryer Mode:
• press button shortly — display panel will show dryer working
time of 1H (1 hour),
• every subsequent pressing of the button will prolong dryer
working time (2-4 hours).
In order to deactivate the Dryer Mode, set the time to 0H (press the
button a few times) or turn the device off and back on.
Letter „H” flashes throughout the whole time, the TIMER function
is used.
During that time:
— to see the set temperature press once any of the / buttons,
— to change the temperature setting press the
or
button
a few times,
— press the button to modify the time after which the Dryer
mode will be terminated.
