32
User Manual - KTX 4 Blue electric heating element
Intended use of device
The heating element is an electric device intended solely for in
-
stallation in radiators (standalone or connected to the central heat
-
ing system) to serve as space heaters, or clothes and towels dryer.
Heating element power output should be matched with radiator
output for parameters of 75/65/20° C.
Technical information
Model markings
(power cable type)
–
PW (Straight cable with plug)
–
PB (Straight cable without plug)*
–
SW (Spiral cable with plug)
– MS (screw conn on/off switch)*
* Device intended to be connected permanently to the system
Power supply
230 V / 50 Hz
Heat outputs available
120, 200, 300, 400, 600, 800, 1000 [W]
Insulation class
Class I
Towel rail connection thread
G 1/2"
Casing protection class [IP]
Temperature measurement:
IPx4: only the MS version
IPx5: except the MS version
Temperature inside the radiator and room temperature ― through a sensor located
in the housing or through an external Bluetooth sensor.
Power output of heating rod [W] 120 200 300 400 600 800 1000
Length of heating rod: [mm]
325
285 310
345 375
485
575
