TERION UM20-100111B, Installation Manual, Page: 71 / 78

Appendix C Installation Checklist
Kit Contents
❑
Kit contents match packing list
Type of Installation
❑
Side Mount
❑
Rear Mount
FM/DHF Antenna System
❑
Antenna base straight and secure
❑
Antenna ground wire secure
❑
Antenna support bracket straight and secure
❑
Antenna support bracket has grommet in place
❑
Exposed cables in split tubing
❑
Tie wraps installed tightly on both ends
❑
Tie-wrap bases secure
❑
Stud mount correct, tight, and secure
❑
Antenna correct, tight, and secure
❑
Coaxial cable secured tightly
❑
Entry hole has grommet and is sealed
❑
Antenna ground point secure to grounding
point with less than 1.0-ohm resistance.
GPS Antenna System
❑
GPS antenna facing upright and secure
❑
GPS antenna wire in split tubing and secured
with tie wraps and tie-wrap bases
❑
Entry hole has grommet and is sealed
DT System
❑
DT cable routed correctly
❑
DT cable strain relief in place
❑
DT cradle secure
Power Cable System
❑
Power connected to correct source and
power cable is secure
❑
Power cable ground wire connected securely
to ground point with less than 1.0 ohm
resistance to negative battery terminal
❑
Power cable strain relief in place with
service loop
ITU System
❑
ITU plate secure and tight
❑
ITU firmly attached to ITU plate
❑
Cables firmly attached
❑
Cables secured in split tubing with service
loop
❑
Extra cable looped and secured at a place
where it will not become entangled
Characterization and Activation
❑
Antenna Characterized with CQI > 96
❑
Unit activated
❑
Sent and received messages
C-1
Mobile Messaging System Installation Manual June 15, 2001
UM20-100111B Terion, Inc.