TERION UM20-100111B, Installation Manual, Page: 53 / 78

12 Address Setup
With calibration and activation complete, and the Mobile Messaging System activated, the
addresses available on the Driver Terminal are Auto Route, and Terion Network Operations
Center (NOC). For most installations, these two addresses are adequate; however, for others,
it may be necessary to set up additional addresses or a different default address.
Note: Driver-to-driver messaging is not supported at this time. Addresses
that start with a 3000000 are driver addresses – do not enter them into the
Address list.
12.1 Add or Modify an Address
1. Press the
F3
key. The Edit Text Message display, or the Choose Message Format
display, appears.
2. Press
ALT + A
. The Choose Address dialog box appears.
3. Press
ALT + N
.
The New Address dialog box appears.
4. Type the address name on the Description line (This name will appear in the Address
list in the Create/Edit Message screen and Address Select pop-up menu).
5. Press the
TAB
key, then type the address number on the Address line. (This is the
address the Terion Network uses to find the message recipient – call Terion Customer
Service at 877-283-7466 to get this number.)
Note: You must type in the description and address exactly;
otherwise, undeliverable or unrecognizable message files may
impact your system. Do not enter any 3000000 addresses.
6. Send a test message to the new address to confirm that the message is delivered to the
correct address.
12-1
Mobile Messaging System Installation Manual June 15, 2001
UM20-100111B Terion, Inc.