terim TERCM1200PE, Instruction Manual

Page: 8 / 21

Removing the used grounds
• After the brewing cycle is complete, wait approximately 30 seconds until the
operating pressure has been sufficiently reduced.
• Exercise caution when removing the filter holder, it may still contain some hot
water.
• Please note that, when preparing 2 cups of espresso, slightly more water will
remain on the espresso grounds.
To remove the coffee grounds, gently tap the side of the filter holder against a
vertical surface. Wipe the filter holder thoroughly clean afterwards.
Preparation
Espresso
• Fill the container with water.
• Insert the plug into a suitable wall outlet and use the On/Off switch to turn on the
appliance. The main indicator light and temperature indicator light will be turn on.
• Set the selector to the hot-water position (button released).
• Preheat the filter holder and the cup(s).
• Remove the filter holder, fill with ground coffee and re-attach it.
• Place the cup(s) underneath the outlets.
• When the temperature indicator light turns off, turn the operating dial to position
. The espresso is now delivered straight into the cup(s).
• Once the cup(s) are full, turn the valve selector to its neutral position to switch the
pump off.
• Wait for approximately 30 seconds before detaching the filter holder and
removing the coffee grounds.
• The espresso machine is now ready for another brewing cycle.