terim TERCM1200PE, Instruction Manual

Page: 10 / 21

that the nozzle remains submerged while frothing is in progress.
• As soon as the milk appears to be sufficiently frothy, turn the operating dial to its
neutral position to switch the pump off. During frothing, the milk will heat up, but
must not be allowed to reach boiling point.
• Once the operating dial is in the neutral position, a slight noise will be heard. This
is due to technical processes and perfectly normal.
• Pour the hot milk into the cup containing the espresso coffee and, using a spoon,
spread the milk froth over it.
Reheating beverages
• Push the hot water / steam selector button in.
• Insert the steam nozzle into the liquid to be reheated and turn the operating dial
to the position.
• Once the liquid has reached the desired temperature, turn the operating dial back
to its neutral position.
• When steam is no longer needed, release the selector button again.
Care and Cleaning
• Before cleaning the espresso machine, ensure it is disconnected from the power
supply and has cooled down completely.
• To avoid the risk of electric shock, do not clean the appliance with water and do
not immerse it in water.
• Do not use abrasives or harsh cleaning solutions.
• Before cleaning the appliance, and also in the case of the appliance remaining
unused for an extended period of time, the remaining water in the container
should be drained completely. The water container should be thoroughly rinsed at
regular intervals.
• The steam nozzle must be cleaned immediately after the frothing process. Wiping
the nozzle with a wet cloth should suffice.