Terex TSV-70, Operation And Maintenance Manual

Page: 15 / 90

Note:
If any of the safety signs shown in this section are missing or damaged, contact
your dealer to obtain a replacement.
Key (continued)
10. Entanglement hazard (engine compartment)
11. Burn hazard (engine compartment)
12. Crush hazard (pinch point)
13. Crush hazard / fall hazard / rollover/ejection hazard (inside cab)
14. Skin (oil) injection hazard
15. Crush hazard (lift arms)
16. Crush hazard (lift arm brace)
17. Crush hazard (run over)
18. Tie down locations, Rear (on rear bumper)
19. Burn Hazard (engine compartment)
2 SAFETY
13
Burn Hazard
Hot fluid under pressure can scald.
Allow the machine to cool thoroughly
before opening.
2030-595
11
Entanglement Hazard
Rotating parts can cause personal injury.
Keep away from fan and belt while the
engine is running. Stop engine before
servicing.
2030-600
10
WARNING
Crush Hazard
Contact with moving machine can
result in death or serious injury.
Stay clear of moving machine.
7005-813
WARNING
Crush Hazard
Machine rollover can result in
death or serious injury.
Always fasten Seat Belt
Fall Hazard
Falling from a machine can result
in death or serious injury.
No Riders
Rollover/Ejection Hazard
Death or serious injury can result.
Carry loads low. Load unload and
turn on level ground. Travel on
inclines with heaviest end of
machine uphill.
WARNING
WARNING
7005-825
Crush Hazard
Death or serious injury can result
from contact with moving lift arm or
attachment.
Keep clear of lift arms and
attachments.
2030-592
Injection Hazard
Escaping fluid under pressure can
penetrate skin, causing serious injury.
• Relieve internal pressure before
disconnecting any line or fitting.
• Keep away from leaks or pinholes.
• Use cardboard to check for leaks.
Fluid injected into skin must be surgi-
cally removed within a few hours by a
doctor familiar with this type of injury
or gangrene will result.
2030-602
14
15
13
17
18
Crush Hazard
Death or serious injury can result
from contact with moving lift arm or
attachment.
Install lift arm brace prior to servicing.
2030-594
16
Burn Hazard
Contact with h ot surfaces can
cause burns.
• Do not touch hot
components!
• Allow the machine to
cool thoroughly prior to
servicing.
2030-601
19
WARNING
Crush Hazard
Contact with moving parts can result
in serious injury.
Keep hands clear of moving parts
during equipment operation.
7005-812
12