Section 110-0030
SM 1691 Rev 1 11-99
1
ENGINE - Engine and Mounting
SM - 2095
DESCRIPTION
Numbers in parentheses refer to Fig. 1.
For engine make, model and specification, refer to
Section 000-0000, GENERAL INFORMATION. For
engine servicing and repair data refer to the engine
manufacturers service manual.
The engine is mounted to the tractor frame at three
points by a mounting bracket at the front of engine (1)
and two rear mounts (14 & 15). Rubber isolation
mounts (11) through engine mounts provide sufficient
flexibility to absorb varying engine vibration and
torsional loads.
There is a full-flow oil filter (2) remote mounted on the
right hand side of the frame in a downward position.
Refer to Fig. 2. The filter is of the throw away, spin-on
type. Oil supplied by the engine oil pump passes
through oil filter (2) before reaching the various moving
Fig. 1 - Engine and Mounting
1 - Engine
2 - Oil Filter
3 - Coolant Filter
4 - Fuel Filter
5 - 'V' Belt
6 - Bolt
7 - Locknut
8 - Engine Coupling
9 - Spacer
10 - Washer
11 - Isolation Mount
12 - Fan
13 - Snubbing Washer
14 - Rear LH Mount
15 - Rear RH Mount
16 - Lockwasher
17 - Bolt
18 - Screw
19 - Alternator Guard
20 - Bolt
21 - Lockwasher
22 - Bolt
23 - Bolt
23
8
9
16
1
14-15
11
10
12
19
7
17-18
4
2
6
3
9
13
11
10
7
LUB. OIL
FUEL
21 20
22
5
Find manuals at http://best-manuals.com/search?&s=TEREX-SM1688
