Section 000-0000
SM 1689 2-99
3
ELECTRICAL SYSTEM
Type .................................... 24 volt, Negative Ground.
Battery ................................ Two, 12 Volt, 165 Ah each
Accessories ...................................................... 24 Volt
Alternator ......................................................... 70 Amp
SERVICE CAPACITIES
Tractor
Cooling System ......................... 43 litres (11.4 US gal)
Fuel Tank ................................. 378 litres (100 US gal)
Engine Crankcase (& filters) ..... 24.6 litres (6.5 US gal)
Transmission and Converter .... 48.5 lites (12.8 US gal)
Hydraulic System ....................... 204 litres (54 US gal)
Drive Axle .................................... 17 litres (4.5 US gal)
Scraper
Cooling System ......................... 42 litres (11.1 US gal)
Fuel Tank ................................... 303 litres (80 US gal)
Engine Crankcase (& filters) ..... 24.6 litres (6.5 US gal)
Transmission and Converter ...... 49 litres (12.9 US gal)
Drive Axle .................................... 17 litres (4.5 US gal)
VOLUMES
Struck (SAE) .................................... 10.7 m³ (14.0 yd³)
Heaped 3:1 ...................................... 12.2 m³ (16.0 yd³)
Heaped 2:1 ...................................... 13.0 m³ (17.0 yd³)
Heaped 1:1 (SAE) ........................... 15.3 m³ (20.0 yd³)
Servo Control Functions:
Capacity at 2 200 rev/min ........................ 43 litre/min
(11.3 US gal/min)
System Pressure
at 1 500 rev/min ........................ 17 bar (250 lbf/in²)
Steering Pump ............................ See Steering System
Three fingertip servo assisted control levers allow
independent operation of the bowl, apron and ejector.
BOWL
High strength alloy steel used in sides and floor for
increased strength and life. Low, wide design aids
loading ability. Bowl employs two single stage, double
acting cylinders to exert positive down pressure on
the cutting edge to help penetrate hard material and
load faster. Cylinders are interchangeable.
Cylinder Bore and Stroke ..................... 203 x 460 mm
(8.00 x 18.12 in)
Maximum Hydraulic Force at Cutting Edge
with Bowl Empty .... 214 kN (21 822 kgf) (48 000 lbf)
APRON
Gravity closed, semi-radial design, power closing
apron operated by one single stage, single acting
cylinder with apron arms mounted outside the bowl.
Apron and ejector cylinders are interchangeable.
Cylinder Bore and Stroke ..................... 233 x 635 mm
(9.17 x 25.0 in)
EJECTOR
Positive roll-out type operated by one single stage,
single acting cylinder.
Cylinder Bore and Stroke ..................... 233 x 635 mm
(9.17 x 25.0 in)
CUTTING EDGE
Four section hardened cutting edge with drop centre
capability. All edges are interchangeable and
reversible.
Dimensions (Each) ........................ 25 x 406 x 724 mm
(1.0 x 16.0 x 28.5 in)
VEHICLE WEIGHTS
Standard Vehicle
%
kg
lb
Net Weight Distribution
Tractor Axle
58.5 16 560
36 510
Scraper Axle
41.5 11 710
25 815
Net Vehicle Weight
28 270
62 325
Rated Payload
21 770
48 000
Gross Weight Distribution
Tractor Axle
52.0 26 020
57 370
Scraper Axle
48.0 24 020
52 955
Gross Vehicle Weight
50 040
110 325
* * * *
General Information - TS14F Technical Data
Find manuals at http://best-manuals.com/search?&s=TEREX-SM1688
