First Edition • First Printing
Operator's Manual
Controls
Part No. 1301594GT
Z
®
-45 XC
™
23
12
Turntable rotate switch
Move the turntable rotate switch to the right
and the turntable will rotate to the right. Move
the turntable rotate switch to the left and the
turntable will rotate to the left.
13
Emergency power switch
Use emergency power if the primary power
source (engine) fails.
Simultaneously hold the emergency power
switch to either side and activate the desired
function.
14
Platform rotate switch
Move the platform rotate switch to the right
and the platform will rotate to the right. Move
the platform rotate switch to the left and the
platform will rotate to the left.
15
Jib boom up/down switch
Move the jib boom switch up and the jib boom
will raise. Move the jib boom switch down and
the jib boom will lower.
16
Platform level switch
Move the platform level switch up and the level
of the platform will raise. Move the platform
level switch down and the level of the platform
will lower.
17
Primary boom extend/retract switch
Move the primary boom extend/retract switch
to the right and the primary boom will retract.
Move the boom extend/retract switch to the left
and the primary boom will extend.
18
Function enable button
Press and hold the function enable button to
enable the functions on the ground control
panel to operate.
19
Platform overload indicator light
Light flashing indicates the platform is
overloaded. The engine will stop and no
functions will operate. Remove weight until the
light goes off and then restart the engine.
20
15A breaker for control electrical circuits
21
LCD readout screen
Screen displays hour meter, voltage, oil
pressure and coolant temperature. Screen
also displays fault codes and other service
information.
22
Not used
