Third Edition • First Printing
Operator's Manual
Operating Instructions
Part No. 1315875GT
Z
®
-40N • Z
®
-40N RJ
45
Emergency Stop
Push in the red Emergency Stop button to the off
position at the ground controls or the platform
controls to stop all functions.
Repair any function that operates when either red
Emergency Stop button is pushed in.
Selecting and operating the ground controls will
override the platform red Emergency Stop button.
Auxiliary Power
Use auxiliary power if the primary power source
fails.
1 Turn the key switch to ground or platform
control.
2 Pull out the red Emergency Stop button to the
on position.
3 Press down the foot switch when operating the
auxiliary controls from the platform.
4 Simultaneously hold the auxiliary
power switch on and activate the
desired function.
The drive function will not operate with auxiliary
power.
Operation from Ground
1 Turn the key switch to ground control.
2 Pull out the red Emergency Stop button to the
on position.
To Position Platform
1 Hold the function enable switch
to either side.
2 Move the appropriate toggle switch according
to the markings on the control panel.
Drive and steer functions are not available from
the ground controls.
Summary of Contents for Genie Z-40N
Page 62: ......
