Terex Genie QS-12W, Operator'S Manual

Page: 29 / 57

Second Edition • First Printing Operator's Manual
Inspections
Part No. 1297733GT QS
™
-12W • QS
™
-15W • QS
™
-20W 27
Test the Outdoor Use Button
35 Do not press and hold the function enable
switch on control handle.
36 Press the outdoor use button.
Result: The LED under the outdoor button will
illuminate.
37 Press the lift function enable button.
38 Press and hold the function enable switch on
the control handle. Slowly move the control
handle in the direction indicated by the blue
arrow.
QS-12: Result: The platform should raise to
9 ft 1 in/2.76 m and stop. The alarm should
sound. The platform controls LED readout
should display OHL.
QS-15: Result: The platform should raise to
11 ft 1 in/3.37 m and stop. The alarm should
sound. The platform controls LED readout
should display OHL.
QS-20: Result: The platform should raise to
15 ft 6 in/4.72 m and stop. The alarm should
sound. The platform controls LED readout
should display OHL.
Test the Drive Function Button
39 Press the drive function button.
40 Wait seven seconds for the drive function to
time out. Slowly move the control handle in the
direction indicated by the blue arrow, then in
the direction indicated by the yellow arrow.
Result: No functions should operate.
Test the Steering
Note: When performing the steer and drive
function tests, stand in the platform facing the steer
end of the machine.
41 Press the drive function button.
42 Press and hold the function enable switch on
the control handle.
43 Press the thumb rocker switch on top of the
control handle in the direction indicated by the
blue triangle on the control panel.
Result: The steer wheels should turn in the
direction indicated by the blue triangle.
44 Press the thumb rocker switch on top of the
control handle in the direction indicated by the
yellow triangle, on the control panel.
Result: The steer wheels should turn in the
direction indicated by the yellow triangle.