Operator's Manual Supplement
First Edition • Fourth Printing
Introduction
8
Part No. 1292178GT
Using the Access Deck with the
options below will result in
death or serious injury.
The Access Deck cannot be properly installed on
platforms equipped with the following:
Panel cradle (option)
Center mounted swing gate (option)
Genie Fall Arrest Bar
Half mesh (option)
Full mesh (option)
Aircraft Protection (option)
Using the Access Deck with the
options below will result in death
or serious injury.
The Access Deck cannot be used on platforms
equipped with the following:
Front entry platforms with single sliding mid-
rail (6 ft only)
Lift Tools™ Access Deck
Safety
Read, understand and obey all warnings and
instructions provided with the Access Deck.
Do not exceed the rated platform capacity. The
weight of the Access Deck assembly will reduce
the rated platform capacity and must be subtracted
from the total platform load.
Access Deck for 8 ft
Platform
36 lbs/16 kg
Access Deck for 6 ft
Platform
29 lbs/13 kg
The Access Deck assembly and handle must be
mounted for use together.
Be sure the Access Deck is securely installed.
Only use the folding handle for stability.
When the Access Deck structure is attached, this
manual should be with the machine at all times.
The Access Deck can be transported on the mid-
rail when all locking mechanisms are engaged and
securely fastened to the platform. The platform is
required to be parallel to the ground at all times
during transportation.
Do not use Access Deck with
ice, grease or debris on the
mid-rail surfaces.
Do not operate the boom once
the operator has tied off and
standing on the Access Deck.
Summary of Contents for Genie Lift Tools Expo Installer Z-60/34
Page 17: ......