manualshive.com logo in svg

Terex Genie Lift Tools Expo Installer Z-60/34, Operator'S Manual Supplement, Page: 14 / 17

Share
Download
Terex Genie Lift Tools Expo Installer Z-60/34 Operator'S Manual Supplement Download Page 14

Operator's Manual Supplement

 

First Editi

on • Fourth Printing

 

Installation Instructions 

 

 

14 

 

Part No. 1292178GT 

 

 

Handle Installation

 

Note: Handle assembly must be mounted and 
accessible near the Access Deck anytime the 
Access Deck is mounted. 

1

 

Mount the handle assembly to the platform 
railing using both the U-bolts and 3/8-
16 nylock flange nuts. Do not over tighten. 

2

 

Install the 5/16-18 nut onto the rubber bumper. 
Install the bumper assembly into the handle 
forming and secure with the 5/16-18 nylock 
flange nut. Do not tighten at this time. 

3

 

Rotate the handle up to the vertical position. 
Secure the handle with the 3/8" lock pin on the 
handle assembly. 

4

 

Adjust the inside nut on the rubber bumper 
until the bumper sits firmly against the handle. 
Tighten the 5/16-18 nylock nut. 

5

 

Insert the supplement Operator's Manual into 
the manual storage box located in the 
platform. 

 

Summary of Contents for Genie Lift Tools Expo Installer Z-60/34


















Reviews:

No comments