Terex Genie GR-20J, Service Manual

Page: 70 / 127

Service Manual March 2022
Repair Procedures
58 GR ™ -20J • GR ™ -26J Part No. 1312899GT
2 Install six 12 mm wear pads, and the
corresponding shims removed in the mast
disassembly process, onto the bottom mast
sections 1 and 2.
3 Install two 10 mm wear pads, and the
corresponding shims removed in the mast
disassembly process, onto the top of mast
section 1.
4 Install six 12 mm wear pads, and the
corresponding shims removed in the mast
disassembly process, onto the top mast
section 1.
5 Apply the grease onto the inner faces of the
mast section 1.
Grease specification
RETINAX HDX2 grease, NLGI (lithium based) or
equivalent
1 grease
2 mast section (mast 1 shown)
6 Apply grease onto the outer faces of the mast
sections 1 and 2.
1 grease
2 mast section (mast 2 shown)
7 Carefully assemble the mast sections using
the mast disassembly procedure in reverse
order. Refer to Repair Procedure,
How to
Disassemble the Mast, GR-20J .