Terex DTM 00101 (standard), Operation And Maintenance Manual

Page: 80 / 102

7 MAINTENANCE
78
7.3 Maintenance Intervals
7.3-1 Daily Maintenance Tasks
7.3-2 50-1000 hour Tasks
Page
1 Check hydraulic oil level (figure 7.7-3, p-82) 82
2 Check engine oil level 80
3 Check fuel level (gauge on instrument panel) 41
4 Check fan belt tension / condition 83
5 Check track tension / condition 85
6 Check for proper control operation 42
7 Check for proper switch and lighting operation 41
8 Check / clean air cleaner elements 88,89
9 General visual check for cracks, damage, completeness 24,61
10 Check for leaks in hoses, tubes, valves, pumps, cylinders, etc. 22,31,61
11 Drain water separator 84
12 Lubricate all grease points 79
13 Inspect / clean the radiator/cooler and engine compartment 90-91
14 Inspect / clean undercarriages (as needed) 85
15 Inspect / clean chassis 91
16 Inspect/replace missing/damaged safety signs 14-17
Daily
Page
1 Inspect drive sprocket rollers (replace as needed) 87
Page
1 Replace engine oil & filter 81
2 Replace hydraulic filter(s) 83
3 Replace planetary oil (initial change only) 86
Page
1 Replace fuel filter element 84
2 Replace planetary oil (normal change interval after initial change) 86
Page
1 Replace hydraulic oil 82
2 Replace engine coolant (use SCA additive, see engine manual) 90
Every 50 operating hours
Every 250 operating hours
Every 500 operating hours
Every 1000 operating hours