G6H NOVA User Manual XM1557-V1.1-NR
36
11.
ERROR MESSAGES
When you turn on the device
it will first perform a reset
.
The display may show
“
Err channel is
XX
”
should there be problems with one or more functions
.“
XX
”
stands for channel 1
2
3
4 5 6 etc whose sensor has encountered a problem
.
For example when the display shows
“
Err
channel is Pan movement
it means there is an error on channel 1
.
If there are errors on channel
1
channel 3
channel 5 at the same time
you may see the error message
“
Err channel is Pan
movement
“
Err channel is Tilt movement
“
Err channel is Shutter
flash twice and then the
device will generate a second reset
.
If the error messages persist after performing a reset more
than twice
the channels which have errors may not work properly however
all other functions
can work as usual. Please contact your dealer or manufacturer for service
.
Self repair is not
allowed
.
PAN- movement Er
(PAN- yoke movement error) This message will appear after the reset of the fixture if the yoke’s
magnetic-indexing circuit malfunction (Optical Sensor or Magnetic Sensor fails) or the stepper
motor is defective (or its driving IC on the main PCB)
.
The PAN- movement is not located in the
default position after the reset
.
TILT- movement Er
(TILT- head movement error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions ((Optical Sensor or Magnetic Sensor fails)) or the stepper
motor is defective (or its driving IC on the main PCB)
.
The TILT- movement is not located in the
default position after the reset
.
CMY wheel Er
(CMY wheel- error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is
defective (or its driving IC on the main PCB)
.
The CMY - movement is not located in the default
position after the reset
.
Color wheel Er
(Color wheel- error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is
defective (or its driving IC on the main PCB)
.
The Color - movement is not located in the default
position after the reset
.
Gobo 1 wheel Er
(Gobo wheel 1- error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is
defective (or its driving IC on the main PCB)
.
The Gobo - movement is not located in the default
position after the reset
.
Gobo Rotation wheel 1 Er
(Gobo Rotation wheel 1- error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is
defective (or its driving IC on the main PCB)
.
The Gobo_R 1 - movement is not located in the
default position after the reset
.
