XM974-V1.0-NR
- 30 -
0-19
colour change normal
20-29
colour change to any position
30-39
colour & gobo change to any position
40-59
Lamp on
60-79
Lamp switch off
80-84
All motor reset
85-87
Scan motor reset
88-90
Colors motor reset
91-93
Gobo motor reset
94-96
Shutter & Dimmer motor reset
97-99
Other motor reset
100-119 Internal program 1
120-139 Internal program 2
140-159 Internal program 3
160-179 Internal program 4
180-199 Internal program 5
200-219 Internal program 6
220-239 Internal program 7
240-255 Auto program by music
Pan Fine 16bit
11
15
0-255
Fine control of Pan movement
Tilt Fine 16bit
12
16
0-255
Fine control of Tilt movement
10. ERROR MESSAGE
When you turn on the fixture, it will make a reset at first. The display may show“Err channel is
XX” while there are problems with one or more channels. “XX” stands for channel 1, 2, 3, 4, 5,
6 who has the testing sensor for positioning. For example, when the display shows “Err channel is
Color wheel”, it means there is some error in channel 13. If there are some errors on channel 1,
channel 5, channel 6 at the same time, you may see the error message “Err channel is Color
wheel”, “Err channel is Pan movement”, “Err channel is Tilt movement”, flash repeated for 2
times, and then the fixture will generate a second reset. If the fixture remain error message after
performing reset more than 2 times, only the channels which have errors can not work properly,
others can work as usual. Please contact with dealer or manufacturer for service, self repair is not
allowed.
01Er
(Color wheel- error) This message will appear after the reset of the fixture if the magnetic-indexing circuit
