Shake function (compostable waste)
If refuse gets stick in the bin, you can use the shake
function.
Proceed as follows:
Keep the light blue UP
button (
A
) pressed once
the bin is in the tilting
position.
The bin is automatically
shaken 5 times.
Button control station for bin take-up (03)
On the L/H tilt arm there is a button control station
for limited raising and lowering of the pick-up comb.
• Roll the bin against / above pick-up comb (05).
• Bin take-up:
Press the UP button (
G
)
of the bin take-up con-
trol station (03).
The bin is picked up from
the ground with the
wheels.
Then go to the button control station (01/02) on
the L/H or R/H side.
• Then proceed as described in points 6 and 7.
EN
13
E
N
37751
12-2014
3
.
B
in
l
if
t
o
p
e
ra
ti
o
n
3.5
Loading with the pick-up comb
ã
Terberg Machines B.V., IJsselstein, The Netherlands
All rights reserved. No part of this book may be reproduced, stored in database or retrieval system, or published, in any form or in any
way, electronically, mechanically, by print, photoprint, microfilm or any other means without prior written permission from the publisher.
1) Check that the hopper plate (06) is closed.
2) Switch on the refuse collection vehicle compac-
tor system.
3) If there are footboards, fold both of them
down.
4) Catcherbar (07):
Check that the catcher-
bar is in
Position A
(this
is the working position).
The yellow indicator LED
(left) should be on. If this
is not the case, press the
black button (
C
) once.
Alternately, the bin lift can be provided with a func-
tion that sends the catcherbar automatically to
Position A when presented with a mini-container.
5) Roll the bin against / above pick-up comb (05).
6) Bin emptying:
Press the light blue UP
button (
A
), on either
side of the bin lift. The
bin is then raised to the
tilting position and emp-
tied.
7) Bin removal:
Press the dark blue
DOWN button (
B
). The
bin then lowers back to
the ground.
Remove the bin from the
bin lift as soon as the
wheels
touch
the
ground.
2-wheel bins;
contents 80 to 390 litres
according to EN 840-1
Chamberlain
Chamberlain
A
B
A
B
A
B
A
B
S
T
O
P
S
T
O
P
Make sure that the bin is located correctly on
the pick-up comb.
Make sure that the bin is located correctly on
the pick-up comb.
Only give an extra shake if there is a need for
this. Shaking takes time and causes extra
noise for the surrounding area.
