Installation Guide
Connecting the Modem
14
Terayon TJ 700x Series DOCSIS Cable Modem Installation Guide
Connecting the Power Adapter and Startup
Power for your cable modem is generated by the Power Adapter unit that comes with the
modem. The Power Adapter and power cord shipped with your Terayon TJ 700x Series
modem is one of the adapters shown in Figure 10, in compliance with the requirements
of your country.
.
Figure 10
Power Adapters
Connecting the Power Adapter to the Modem
To connect the Power Adapter to the modem, do the following:
1. Remove the modem Power Adapter from the modem cable box.
2. Using Figure 11 on page 15 as a guide, insert the Power Adaptor output connector
into the DC Power input jack on the back of the modem.
Starting the Modem
To start operating your new Terayon cable modem, do the following:
1. Plug the Power Adaptor into an appropriate AC power outlet as shown in Figure 11
on page 15.
Once your Terayon cable modem is properly connected and the Power Adapter is con-
nected to an AC power outlet, it will automatically boot-up and start scanning for the
active cable modem channel from your cable company server.
2. Verify the Cable and PC LED indicators on the modem front panel are ON.
If the Cable and PC LEDs are ON and not blinking, you have successfully installed
your new Terayon cable modem. If the Cable and PC LEDs are not ON or are blink-
ing, See “Troubleshooting” on page 20.
CA
UTION
RISK OF ELECTRIC SHOCK
DR
YLOCA
TION USE ONL
Y
SWITCHING
AC AD
APTER
Tera
yon
AC
Adaptor
